Features:

• Special processing range, widely satisfy the needs of large workpieces. The Max. working width is 400mm,and the Max. thickness is 300mm.
• Each spindle with the diameter of 50mm . The outboard bearing on the horizontal spindles can increase the cutting capacity . The Max. outer diameter of cutting circle reaches 230mm, this is good to improve the machining quality.
• The feeding system is built up with 6 groups of bottom rollers and 12 groups of top feeding rollers which OD is 180mm. They are driven by pneumatic pressure to ensure powerful feeding. Besides, the 1st bottom roller and infeed table can move up and down at the same time to simplify adjustment
• The feeding table is embedded with wearable alloy for the durability
• The working table adopts special alloy steel and also treated by vulcanize treatment with hardness more than HRC60 degrees for the durability.
• The left and right spindles are designed to adopt double-deck working table. The axial adjustment range is 80mm. As it can hold two groups of cutter blocks, it is flexible for machining.
• The working thickness of top spindle and the working width of left spindle is adjusted by digital control. Higher precision and easier to operate.
• Hold-down pressure of each feeding roller, side pressure wheels, front and rear pressure board of top spindle is pneumatic controlled and can be adjusted separately.
• Motion adjustment of each spindle is locked by air and inter-locked with the electric system for safe operations
• For the 2nd bottom spindle, there is individual motor automatically to lift the top pressure shoe, and the saw blade can be installed with Max diameter of 300mm .The top pressure shoe which is controlled by pneumatic enlarges the working range as well.
• To assure powerful cutting, the spindles are with high-power motor and driven by synchronous belt.
• Inverter feed speed of 5-25m/min.
• Electric oil pump lubricates the working table in timing and ration (which can be adjusted), and centralized lubrication to moving parts by manual oil pump.
• Adopting PLC system to control of each spindle’s position setting.
• Moveable PLC screen , convenient for using
• Adopting electric components from international class with steady quality
• Pneumatic blower to ease the cleanness
• Sealed safety cover is for the protection against noise and dust, and it is helpful for safe operation